Before you start: vehicles, fleets, consumables and permissions need to be set up. See Set Up Daily Service. You need the Daily Service Review permission to add, edit and delete entries.
How the day works
- Entries arrive from the Fuel Island Import, or your staff key them in on this page.
- Review the day: look for errors and warnings on each row, and correct what's wrong. This article.
- Add the consumables (fuel, oil and so on) and check the totals. See Enter Consumables and Check Totals.
- Update posts the day. See Post the Day with Update and Print.
Saving an entry never posts it. Nothing reaches the vehicle, inventory or the general ledger until someone with the Update permission posts the day.
Choose a service date
Open Service Date. It lists every date that has entries waiting to be posted, with the number of entries on each date. Days post in order, oldest first, so start with the oldest date.
The heading sums the day up: the entries, the vehicles, how many errors, and whether the day is Unposted, Partly posted or Posted, read-only.
- A date that still has entries waiting shows them in an editable grid.
- To open a date that was already posted, use Or any past date. A posted day is read-only, shows who posted it, and can't be changed here. To correct a posted reading, see Correct Mileage with Service Entry Mileage Correction.
- You can't add an entry on a future date.
- Time for new rows sets the time a new entry starts with.
This day shows 2 errors.
What each row shows
Each row is one vehicle service. The columns are:
| Column | What it is |
|---|---|
| Vehicle # | The vehicle serviced. It must be an active vehicle that belongs to a fleet. A red number beside it counts the row's messages. |
| Time | When the service happened. Required. |
| Hub Reading and Previous Hub | The vehicle's hub (odometer) reading now and at its last entry. |
| Actual Miles | Calculated: the miles since the previous reading. You don't type it. |
| Hours columns | The hours reading, the previous hours and the elapsed hours. They are hidden when no entry on the date has hours. Entries from the fuel island import don't carry hours. |
| Emp # | The employee who recorded the service. Optional. |
| Consumables Used | What each entry used. One quantity box for each column chosen in Daily Service Settings appears when you edit the row. See Daily Service: Enter Consumables and Check Totals. |
Select the + at the left of a row to expand it. The expanded row shows the quantities, the extended cost, and any consumables that don't have a column, with an Edit Consumables button.
The quick filters narrow the grid to rows with Has errors, Has warnings, or Imported. Imported rows are the ones that came from the ETMS Fuel Island Import. They can be corrected like any other. Use the search box to find a vehicle or an employee.
Add an entry
There are two ways. Add Entry adds a blank row to the grid.
Add in Form opens the whole entry in a form.
- Select the service date, then Add Entry.
- Pick the Vehicle #. Only active vehicles can be picked.
- Check the Time. It starts at the time shown in Time for new rows.
- Enter the Hub Reading, the hours reading, or both.
- Pick the Emp # if you want one. The list shows the people in Human Resources and searches by number or name.
- Type consumable quantities in the boxes if you have them.
- Press Enter to save the row.
When you pick the vehicle, Previous Hub and the Previous hours fill in for you: the vehicle's latest entry in the 30 days up to the service date, or, if it has none, the vehicle's current reading. Actual Miles and the elapsed hours are calculated from them as you type.
If a reading is lower than the previous one, ETMS assumes the meter rolled over at its maximum and adds the miles up to the maximum. It doesn't do that if Miles Hub Exchanged is selected for that entry: see When a meter was replaced section lower.
Keys in a row: Enter saves the row (on the full list it also opens the next row), Escape cancels, and Tab moves between the boxes.
Edit or delete an entry
You can change any row that hasn't been posted. The icons at the right of the row are:
The Wrench opens Service Options.
The Pencil opens the whole entry in a form: time, employee, hub and hours, every consumable quantity and the service options in one place. Select All consumables to see every consumable line, not only the quick-entry ones.
The Trash can deletes the entry. Its consumable lines are deleted with it. Deleting can't be undone. A posted entry can't be edited or deleted here.
Or right-click a row. The menu offers Edit in place, Edit in form, Service Options, Edit Consumables and Delete.
Edit in place opens the row in the grid; the quick-entry boxes appear in that row. Elapsed values recalculate as you type.
Edit in form opens the whole entry in a form.
Service Options opens the Service Options form.
Edit Consumables opens the Consumables form.
Delete asks for the confirmation to delete the entry. Its consumable lines are deleted with it. Deleting can't be undone. A posted entry can't be edited or deleted here.
Errors and warnings
Each row is checked as you type, and again when you save and when the day is posted. A problem shows as a message under the row, so you can see which row needs fixing without leaving the page.
Errors block the row, and a day with an error can't be posted until it's fixed:
- No Time.
- Negative actual miles or elapsed hours. For example, Elapsed miles cannot be negative.
- Actual miles over the mileage limit set for the vehicle's fleet. This is checked for each entry, not for the whole day. The limit is each fleet's own setting.
- A hub, previous hub, hours or previous hours reading over the vehicle's maximum reading.
- A vehicle that isn't known, a vehicle that isn't active, or a vehicle with no fleet.
- An employee number that doesn't exist.
- Problems with a consumable line on the row: see Enter Consumables and Check Totals.
Warnings don't block. The row saves and can be posted. Check them anyway:
- Elapsed hours over 24. Previous hours can be days old, so this is a prompt to check the reading rather than an error.
- Consumable usage outside its normal range, or more issued than is on hand: see Enter Consumables and Check Totals.
To find the rows, select the Has errors or Has warnings quick filter. When a row is fixed, it drops out of the filtered list, and when no errors are left the heading no longer counts them.
Here are some error examples.
Error: Elapsed miles cannot be negative.
Error: One consumable has errors. Open Edit Consumables.
When a meter was replaced
A new hub meter starts counting from a different number, which can make the elapsed miles look far too high. Tell ETMS the meter was replaced:
- Select the wrench on the row. Service Options opens.
- Select Miles Hub Exchanged (or Hours Hub Exchanged for the hour meter), then select SAVE.
- Enter the reading from the new meter, and save the row.
With Miles Hub Exchanged selected, a lower reading is allowed and the elapsed-miles-over-the-limit error clears. When the day is posted, the vehicle's reading becomes this entry's reading.
Service Options also has Cleaned. Select it when the vehicle was cleaned; posting sets the vehicle's last cleaned date. The wrench is highlighted when any option is set. Hours Hub Exchanged isn't available on imported rows.
Common questions
A vehicle isn't in the vehicle list. It may be inactive, or it may have no fleet.
An imported row has no hours. The fuel island import doesn't send hours. You can type a reading on the row if you track hours.
I can't edit a row. Its date has already been posted, or you don't have the Daily Service Review permission.
I fixed a row and the day still can't be posted. Another row on that date still has an error, or the pump total doesn't match the vehicles' total. See Daily Service: Post the Day with Update and Print.
I need to fix a reading on a day that was posted. Use Service Entry Mileage Correction. See Daily Service: Correct Mileage with Service Entry Mileage Correction.