Navigation: ETMS > Transit Assets > Fleet Management > Daily Service > Daily Service Review
Before you start: the day's entries should be reviewed and corrected, and the pump and tank readings entered. See Review and Correct the Day's Entries, Enter Consumables and Check Totals and Enter Tank and Pump Meter Readings. You need the Update permission to post.
What Update does
Update posts one service date's entries. It brings the vehicles, history, preventive maintenance, inventory and (if your agency uses it) the general ledger up to date, and then the day reads Posted, read-only. Until Update runs, ETMS doesn't know about the day's miles, so preventive maintenance forecasts, work orders and tire mileage fall behind. Post every day.
The printer icon makes the day's audit report as a PDF, so you can check what Update will post before you post it. Printing changes nothing.
Post the day
1. Make sure no row on the date has an error, and that the pump totals match. See When Update is refused.
2. Optional: select the printer and read the report. See Print before you post.
3. Select Update (the orange button at the top right).
4. Read the confirmation, Update Daily Service. It shows the date being posted, the number of entries and the number of vehicles. If later dates are also waiting, it reminds you not to post several days without updating work orders (see Work orders). It also lists any problem that stops the update. Select UPDATE to continue, or CANCEL.
5. When it finishes, a message says Posted N entries for N vehicles on the date. The day reads Posted, read-only, and a Posted By column shows who posted it and when.
Update posts the earliest date first
Update always posts the earliest date that still has entries waiting, for all vehicles. The Update button is off on a later date while an older one is waiting. Its tip names the date to post first. Post that date, then the next one.
The order matters: readings and monthly history have to be posted in date order. Daily Service doesn't allow a day to be skipped.
One Update at a time
Update and a mileage recalculation never run at once, for the whole agency. If a second person selects UPDATE while one is running, they're told someone else is posting, and nothing is posted twice. The same goes for a Recalculate on Service Entry Mileage Correction while an Update is running. Wait for it to finish, then continue.
When Update is refused
The UPDATE button in the confirmation stays off, and the window says why, when:
- An entry on the date has an error. The window tells you how many. Fix them (see Review and Correct the Day's Entries) and try again. Warnings don't stop Update.
- The pump total doesn't match. For a metered fuel, the pump total for the day must match the vehicles' total for that day. The window lists each fuel that doesn't match. Check the pump readings in Enter Tank and Pump Meter Readings, or look for a missing or mistyped entry. See Enter Consumables and Check Totals.
Update can also be refused when:
- A part's issued quantity is more than is on hand. Update names the part. Nothing is posted. Correct the quantity, or receive more of the part into inventory, then try again.
- The general ledger doesn't balance for an entry. Nothing is posted until the accounts on the fleet consumable setup are fixed.
- Another date is earlier. Post the earlier date first.
- Another Update is running. Wait and try again.
Everything is posted together, or not at all. If anything goes wrong partway, ETMS rolls everything back and tells you why, so a day is never half posted.
What Update posts
| What | What changes |
|---|---|
| Vehicle readings | The vehicle's last hub reading and last hours reading become the day's highest readings, with their date and time. A reading never goes backwards. If a meter was replaced, the reading becomes that entry's reading. The vehicle's last hours reading is updated based on the hours recorded in the service entry. |
| Last serviced and last cleaned | The vehicle's last serviced date moves to the day's date, but only if that's later than the date it has. If an entry has Cleaned selected in Service Options, the last cleaned date is updated the same way. |
| Mileage history | The vehicle's history row for that month gains the day's elapsed miles and hours. The row is created if it's missing. |
| Tires | Tires installed on the vehicle gain the day's miles. Dead tires don't. |
| Components | Components installed on the vehicle, including components installed on other components, gain the day's miles and hours, and so does their monthly history. |
| Preventive maintenance | The miles and hours since the last inspection grow by the day's miles and hours, on the vehicle and on its components. A PM checklist made for the vehicle afterward uses the new reading. |
| Consumable usage | The vehicle's monthly usage for each consumable and product gains the quantity, miles, hours and cost, and the per-mile and per-hour figures are worked out again. Shop Issue lines are left out. |
| Inventory | For each part, the quantity on hand and current value go down by the day's total across all vehicles, and the average cost is worked out again. One inventory transaction per part per date records the total ("Batch total for all vehicles"). Shop Issue lines are left out. |
| General ledger (if your agency uses it) | A debit and a credit for each line, combined into one journal line per division, account and debit or credit for the whole date, under one batch number. Shop Issue lines are left out. |
| The entries | Marked posted, with the user and time. Nothing is deleted: posted entries stay as the vehicle's service history. |
Update doesn't change the consumable lines. It posts usage, inventory and the general ledger from them. Update doesn't change inspection due dates itself. The PM checklist works out what's due from the new miles and hours.
If your agency doesn't use the general ledger
If no journal source is set up for Vehicle Maintenance, Update posts everything above except the general ledger, and no general ledger rows are written. Nothing else changes: mileage, usage and inventory post as normal.
Work orders
Posting a day that is several days old, before the work orders for those days are updated, can leave work orders and preventive maintenance out of step. When later dates are waiting, the confirmation reminds you of this. Update work orders for the same days before you post them here.
Print before you post
Select the printer icon at the top right to produce the service audit report for the date on screen.
The printer is offered only while the day is unposted. It shows what Update will post:
- The entries, with their errors and warnings.
- The consumables for each part: quantity, cost, and the quantity on hand before and after.
- The general ledger detail, and a summary by account (when your agency uses the general ledger).
- Totals for each fleet.
- Any pump total that doesn't match the vehicles' total, listed with the errors.
Printing changes nothing: it doesn't post, and it doesn't alter any entry. The report starts with a status: Nothing to post, Ready to post: no errors, or Cannot post: N errors need to be fixed first. The totals on the report are the totals Update then posts for that date, so you can check the cost, the part quantities and the ledger before you confirm.
Q&A
The Update button is off. An earlier date still has entries waiting, or you're looking at a day that was already posted. Choose the earlier date, review it and post it first.
Update says there are errors, but I can't see them. Select the Has errors quick filter on the date being posted. Another date may be the one that needs fixing.
Update says the pump total doesn't match. The pump readings and the vehicles' fuel for the day differ. Check the readings on Tank and Pump Meter Entry, and the entries. A pump reading can be corrected even after the day is posted, but fix it before you post.
Can I undo an Update? No. Daily Service has no way to undo a posted day, and posted entries can't be edited on the Review page. To correct a posted reading, use Service Entry Mileage Correction. See Correct Mileage with Service Entry Mileage Correction.
I posted the day. Why doesn't the general ledger show it? Your agency may not have a journal source for Vehicle Maintenance. See If your agency doesn't use the general ledger.
Does Update create work orders for Shop Issue lines? No. Shop Issue lines post nothing to inventory or the general ledger, and Daily Service doesn't create work-order transactions for them.
Can two people work on the same date? Yes for entering and correcting. Only one Update can run at a time.