Daily Service is where your fleet maintenance staff review each day's vehicle service entries (the readings and consumables recorded when a vehicle is fueled and serviced), correct them, and post them. Posting brings each vehicle's readings, mileage history, tires, components, preventive maintenance, consumable usage, inventory and, if your agency uses it, the general ledger up to date.
Entries arrive two ways: automatically from the Fuel Island Import, or keyed in on the Daily Service Review page. Both kinds appear in the same list and are reviewed, corrected and posted the same way.
Daily Service has three pages: Daily Service Review, Service Entry Mileage Correction and Tank and Pump Meter Entry. This article covers what needs to be in place before your staff use them. The other articles cover the daily work.
Before you start
Daily Service uses information your agency already maintains elsewhere in ETMS. Missing required setup information may cause errors when reviewing or posting entries. Check the following requirements before getting started.
| What | Why Daily Service needs it |
|---|---|
| Vehicles that are active, with a fleet | An entry can only be saved for an active vehicle that belongs to a fleet. The fleet supplies the mileage limit and the meter maximums for the vehicle, and the consumable setup used for its costs. |
| Consumable definitions | Each consumable and product (for example FUEL / DF) must be defined, with its unit cost and units of measure. |
| Fleet consumable setup | For each fleet, consumable and product: the inventory part it draws from (if any), the usage ranges used for warnings, and, if your agency posts to the general ledger, the debit and credit accounts. |
| Unit conversions | Needed when a consumable's meter unit differs from its issue unit (for example a meter that reads in gallons for a part issued in liters). |
| Tanks and pumps (optional) | Needed to enter meter readings and to have Totals and Update compare the pumps with the vehicles. See Daily Service: Enter Tank and Pump Meter Readings. |
| Journal source for Vehicle Maintenance (optional) | This is what turns general ledger posting on. Without it, Update still posts everything except the general ledger. |
| Permissions | See Permissions. |
General ledger posting is optional
If your agency has a journal source set up for Vehicle Maintenance, Update posts the day's consumable costs to the general ledger, and each consumable line shows a GL Preview in Edit Consumables. If your agency does not have a Vehicle Maintenance journal source configured, Update processes Daily Service entries without posting to the general ledger. General ledger information is not displayed or validated. Agencies without a general ledger can use Daily Service in full.
When general ledger posting is on, every consumable line that has a cost needs debit and credit accounts on the fleet consumable setup. A line without them shows an error on the row. When it's off, missing accounts don't matter.
Permissions
An administrator assigns Daily Service permissions in Human Resources > Positions > Edit Position, under Transit Assets > Fleet Management > Daily Service.
| Permission | Lets the user |
|---|---|
| Daily Service Review | Open the Daily Service Review page, and add, edit and delete entries and their consumable lines. Open Totals and print the day's audit report (Print icon). Saving never posts anything. |
| Update (under Daily Service Review) | Post a day's entries. Posting changes vehicles, history, inventory and the general ledger, so most agencies give it to fewer people. A user without Update can do everything on the Review page except post: the Update button isn't shown to them. |
| Setup (under Daily Service Review) | Choose the quick-entry consumable columns in Daily Service Settings (the gear). A user without Setup sees the gear turned off. |
| Service Entry Mileage Correction | Open the Service Entry Mileage Correction page, correct readings (posted entries included) and recalculate vehicles. |
| Tank and Pump Meter Entry | Open the Tank and Pump Meter Entry page. The Tank Readings and Pump Readings permissions under it are separate: a user sees only the tab they hold. |
Add the quick-entry columns
You need the Setup permission.
The grid on the Daily Service Review page can show a quantity box for the consumables your staff enter most, so a fuel island worker can type quantities straight into the row. You choose which consumables get a column.
1. On the Daily Service Review page, select the gear at the right of the page heading. Daily Service Settings opens.
2. The settings list up to 10 columns, in the order they appear on the grid. Each shows its number, Consumable, Heading and Unit. The unit comes from the consumable definition and can't be changed here.
3. To add a column, select Add Column, choose the Consumable (type part of the name to find it) and type a Heading. The heading is the column heading on the grid: up to 6 characters. Press Save to finish the row.
The list holds every consumable and product code set up for your agency. Type part of the name to find it. The Heading is what the grid shows above the box: up to six characters. The Unit comes from the consumable.
4. Select Save on the new row to add the column to the settings list. The change is not applied until you select SAVE for the entire Daily Service Settings window.
5. To change a column, select Edit. To change the order, use the up and down arrows. This renumbers the columns. To take it off the grid, select Remove. Neither touches entries already made.
6. Select SAVE to apply your changes to the Daily Service Review grid. Select CANCEL to discard your changes.
If you close the window with unsaved changes, ETMS asks you to confirm before closing.
The new column appears in the main grid, when putting a vehicle record in Edit mode, in the order you set, as a box in the row you are editing.
Consumables that don't have a column can still be entered: use Edit Consumables on any entry. See Daily Service: Enter Consumables and Check Totals.
The settings apply to the whole agency, not to one user. There is no Active setting: to hide a column, remove it.
Q&A
I can't see Daily Service Review in the menu. Your position needs the Daily Service Review permission.
The gear is turned off. You need the Setup permission.
A column I set up doesn't show. Check that the consumable and heading are both filled in on its row in Daily Service Settings, and that you selected SAVE.
Entries show errors about a consumable or fleet setup. The consumable isn't defined, or its fleet consumable setup is missing. See Before you start.