Using the Historical Reports page

The Historical Reports page opens when you go to https://my-tap-reports.myavail.cloud/. It shows scan activity for the date range you choose. This article goes through the page from top to bottom.

Quick reference

I want to… Use Go to
Change the dates The Today / 7d / 30d / 90d / Custom buttons Header and date range
See totals for the period The four tiles across the top Summary tiles
See busy days and hours Scans over time, Time of Day × Day of Week Charts
See which signs need a visit Needs Attention Needs Attention
See where scans happen Geographic Heatmap Geographic Heatmap
Get per-stop numbers into Excel Per-Stop Detail → Export to CSV Per-Stop Detail and export
The header with Custom selected.
  • Historical Reports with your agency's name under it, on the left.
  • Submit Feedback opens your agency's feedback page, if one has been set up.
  • Date range buttons, in the middle:
    • Today (the default): midnight today, agency time, until now. Charts show one bar per hour.
    • 7d, 30d, 90d: whole calendar days in agency time, counting today. For example, 7d is today so far plus the six full days before it, starting at midnight. It isn't a rolling 7 × 24 hours back from the current time. Charts show one bar per day, and today's bar is only partly filled until the day ends.
    • Custom: pick a from date and a to date, then click Apply. Both days are included in full.
  • Alert badge, on the right: No open alerts (green), or for example 3 open alerts. See Needs Attention.
  • Live view ▸ opens the live map. See Using the Live view and setting up a wall display.

Every card loads separately. If one card shows Data unavailable, the rest of the page is still correct. See Troubleshooting myTap Reports.

Summary tiles

The summary tiles for 30 days
Tile What it means
Total Scans Every QR scan and NFC tap in the period. Large numbers are shortened (e.g. 12.4K).
Unique Devices Distinct phones that scanned at least once in the period.
QR Location-Permission Rate Of the QR scans where the phone asked for location, the share where the rider said yes. NFC taps never ask, so they aren't included. A low rate means more scans land in No stop selected.
Median Scan Distance The typical distance between the rider and the stop at the moment of a QR scan. It's shown in feet under 0.1 mile (e.g. 312ft), otherwise in miles (e.g. 0.14mi). A few hundred feet is normal.

Under Total Scans and Unique Devices there's a comparison such as ▲ 6.2% vs prior period. It compares the period with the same length of time just before it. For 30d, that's the 30 days before. For Today, it's the same number of hours just before midnight, not all of yesterday, so use 7d or 30d to judge trends.

Charts

Scans over time — QR vs NFC and Unique Riders.
  • Scans over time — QR vs NFC: scans per hour (for Today) or per day, split into QR and NFC. Hover over a bar for the numbers.
  • Unique Riders: distinct devices in each hour or day. The same phone can appear on several days, so adding the days up gives more than the Unique Devices tile.
Time of Day × Day of Week and User Agents.
  • Time of Day × Day of Week: one square per hour of each weekday. Brighter squares had more scans. Use it to see commute peaks and quiet periods.
  • User Agents: the phones and browsers riders use. Switch between Devices and Browsers. The top six are listed and the rest are grouped as Other.

Needs Attention

This panel lists stops whose signs may be damaged, missing or in the wrong place. It has two columns: Possible Damaged Signs and Possible Miscoded Signs. The alerts don't follow the date range buttons. They always look at the most recent weeks. Each alert type is explained, with examples, in Understanding myTap alerts (Needs Attention).

Tthe Needs Attention panel with open alerts.

Geographic Heatmap

The Geographic Heatmap, with the mouse over a stop.
  • Glowing areas show where riders were when they scanned. Brighter means more scans. Only QR scans with location permission have a position, so NFC taps don't add to the glow.
  • Small dots are your stops. Hover over one to see its name and scan count for the period, e.g. Pattee Transit Center Eastbound — 1.6K scans.
  • Drag to pan and scroll to zoom. View on map on an alert scrolls here and zooms to that stop.

Per-Stop Detail and export

Per-Stop Detail with the top 10 stops chart and the table.

A bar chart of the 10 busiest stops sits above a table of every stop that had scans in the period. Click a column heading to sort by it and click again to reverse the order.

Column Meaning
Stop Stop name and stop ID (e.g. #4).
Scans All scans at the stop.
Unique Distinct devices at the stop.
QR / NFC A bar showing the QR (orange) and NFC (blue) split. Hover over it for the counts.
Median dist. Typical rider-to-stop distance for QR scans, in miles. A dash means none of the scans had a location.
QR loc. perm. The share of QR scans at this stop where the rider allowed location.

The last row, No stop selected, always stays at the bottom. It counts QR scans where the rider didn't allow location, so no stop could be found. It's normal for this row to be large. It has no stop ID and doesn't appear on the map.

Export to CSV

  1. Choose the date range you want.
  2. Click Export to CSV at the top right of Per-Stop Detail.
  3. Your browser downloads a file named like my-tap-stops-CATA-2026-10-12_to_2026-11-10.csv (agency, first day, last day).

The file opens directly in Excel. It has these columns:

  • Stop ID
  • Stop Name
  • Total Scans
  • QR Scans
  • NFC Scans
  • Unique Riders
  • Median Distance (mi)
  • QR Loc. Perm. Rate (%)
  • Stop Lat
  • Stop Lon
  • Last Scan (agency local)

Last Scan (agency local) is in your agency's local time, written as MM/DD/YYYY HH:MM:SS (Ex. 11/10/2026 08:14:52). The No stop selected row is included at the end with an empty Stop ID.

Related Content

Was this article helpful?

Articles in this section

New to the Help Center?
Review the Help Center guide
Help Center Feedback
Have a suggestion for new content or how we can improve the Help Center? Let us know!